Premier mounts panel tv table top stand installation guide (1 page)
Summary of Contents for Premier Mounts ECM-3763S
Page 1
INSTALLATION INSTRUCTIONS Elliptical Ceiling Mount for 37˝ to 63˝ Flat Panels Model: ECM-3763S NORTH AMERICA EUROPE 3130 East Miraloma Avenue Unit 3, The Moorings Business Park, Anaheim, CA 92806 USA Channel Way, Longford, USA and Canada Coventry, CV6 6RH, UK Phone: 1.800.368.9700...
INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY...
Protective Eye Wear Ladder Parts List Make sure your Premier Mounts product has the following hardware and components before beginning installation. If there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700. ECM-3763S Mount Hardware...
Perfect for digital signage applications, the ECM-3763S suspends a single 37”-63” display from the ceiling and attaches to 1.5” NPT pipe. It works with optional brackets for mini PCs and digital media players. The ECM-3763S mounts dis- plays right out of the box - no adapters are needed.
Page 6
(4) complete turns. ECM-3763S Step 2 Once the ECM-3763S has been firmly threaded to the 1.5” NPT threaded pipe, use a screwdriver to tighten the Pan Combo set screw on the threaded coupler. Ensure that all connections are secure and tight before proceeding to the next step.
± Proceed to the “Griplate™ Washer Installation” section. Small Straw Depth Plus 1/8” Allowance Small Straw Depth Plus 1/8” Allowance or Toothpick or Toothpick Mark Mark Installation Instructions Page 7 Visit the Premier Mounts website at http://www.mounts.com...
If No, skip to the “Flat Panel Installation” section. Flat Panel Nylon Spacer Nylon Spacer Installation Premier Mounts’ nylon spacers allow you to attach the Mount Point mounting bracket to flat panels which have recessed or uneven mount points. Each nylon spacer will add distance between the mounting bracket and your flat panel.
ECM-3763S Flat Panel Installation Step 1 Install the mount according to the instructions provided by Premier Mounts. Perform all structural reinforcements before attaching the flat panel to the ceiling mount. Do not release the flat panel until the mounting bracket arms are fully resting on the elliptical mounting bar.
The cables can then be routed through the coupler, up To Ceiling the ceiling adapter (not included) and into the ceiling to a pre-determined source. Ceiling Adapter Coupler Source or A/V Cable Page 10 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
Optional Mounting Configurations and Accessories The ECM-3763S is designed for use with either a standard piece of 1.5” NPT pipe or a variety of ceiling mount adapters from Premier Mounts. Please refer to the ceiling mount adapter installation instructions when mounting. Contact Premier Mounts at (800) 368-9700 with any questions.
ECM-3763S Technical Specifications All measurements are in inches(mm). Page 12 Installation Instructions Visit the Premier Mounts website at http://www.mounts.com...
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the ECM-3763S and is the answer not in the manual?
Questions and answers