Electrolux TK L2 E User Manual page 59

2. Lift slightly rack and take it carefully out from
the drum.
3. Remove right polystyrene part by pulling it.
4. Remove left polystyrene part by pulling it.
Electrical connection
Details on mains voltage, type of current and the
fuses required should be taken from the type plate.
The type plate is fitted near the loading aperture
(see "Product description" chapter).
Connect the machine to an earthed socket, in
accordance with current wiring regulations.
Warning! The manufacturer declines
any responsibility for damage or injury
through failure to comply with the above
safety precautions.
Should the appliance power supply cable
need to be replaced, this must be carried out
by our Service Center.
Warning! The plug must be accessible
after installing the machine.
Door reversal
Warning! Before changing the door stop,
disconnect the mains plug.
1.
A
A
Open loading door.
2. Unscrew hinge A from the front of the machine
and take off the loading door.
3. Remove cover plates B . To do this, insert a
thin screwdriver into the slots as shown in the
illustration, press downwards slightly and pry
out the cover plates.
4. Use an appropriate tool and exert pressure to
unfasten locking block C from the snap-on fix-
ture, take out and re-insert on the other side
having rotated the block through 180°.
5. Unscrew hinge A from the loading door, rotate
through 180°, re-insert on the opposite side
and screw down.
electrolux 59
B
C
B