Charging The Battery - Using The Ac Adapter - AIPTEK POCKET DV M1 User Manual

Charging the battery - using the AC adapter

1
Install one battery into the
camcorder.
Make sure the battery is correctly installed and well
clinched by the drop prevention lever.
2
Connect one end of the USB cable
to the AC adapter.
Align the connector with the USB port on the AC
adapter, and then firmly insert the connector into
the port.
3
Connect the other end of the USB
cable to the camcorder.
Connect the other end of the USB cable to the
camcorder.
4
Plug the AC adapter to a wall outlet.
Select [Charger] in the pop-up menu, and the
charge will start to take place. The LED light will
flash rapidly. As the battery is gradually getting
power, the flash will get more and more slowly.
Note: If the [USB Mode] setting is changed, the
menu will not show up. See page 33 for more
details.
5
Unplug the AC adapter when the
charge is done.
When the battery is fully charged, the LED will emit
steady light.
When using the AC adapter to charge the battery for the first time,
it takes about eight hours to fully charge the battery. Afterwards
each time the recharge will take approximately two hours to
complete.
2
3
4
Select [Charger] to start
charging
7