Loading The Battery (2) - AIPTEK POCKET DV M1 User Manual

Loading the battery (2)

4
Install the battery.
Align the metallic contacts on the battery
with those in the compartment (the metallic
contacts should be on the side of the tripod
socket). Then push the drop prevention
lever upwards and install the battery into the
compartment.
5
Replace the cover after
installing the battery.
Make sure the battery clicks into place and
that the drop prevention lever has clinched
the battery tightly. Then close the cover for
the drop prevention lever to clinch the cover
as well.
Treat the Li-ion battery with care:
• Keep the battery away from fire or high-temperature environment
(over 140º F or 60º C).
• Do not drop the battery or try to disassemble it.
• If the battery is not used for long periods, fully discharge and
charge the battery at least once a year to maintain its life cycle.
Upon using the battery for the first time, you are recommended to
fully charge the battery prior to using the camera.
Purchasing additional batteries:
This camcorder uses one 3.7 volt, 700mAh Li-ion battery as power
source. You can purchase batteries of the same specifications
(compatible with Nokia-6108 battery) at your local shop.
4
5
6
Metallic
contacts
Drop prevention
lever