Advertisement
Step 7b) (velocity setting) and 7c) has to be repeated until the measured value is ex-
actly the same as the known thickness. In this case, the set value is the velocity of
the material to be measured. With this, any number of unknown thicknesses of the
same material can now be measured.
7d) To change velocity, VEL- key 3-13 has to be pressed. To return into measure-
ment mode, this key has to be pressed again or you have to wait until the instru-
ment automatically shows `0`.
7e) By using velocity measurement, the coating thickness or the thickness of any
hard and homogenous materials can easily be measured.
8 Battery replacement
8a) If the battery symbol appears on the display, batteries should be replaced.
8b) Battery cover has to be removed from the instrument and the batteries have to be
taken off.
8c) Batteries have to be installed, paying carefully attention to polarity.
8d) If the instrument is not in use for an extended period, batteries have to be re-
moved.
Annotation:
To have a look at the CE Declaration of Conformity, please click onto the following
link:
https://www.kern-sohn.com/shop/de/DOWNLOADS/
TB-US-BA-e-1713
7
Advertisement
