Table of Contents
Advertisement
Direct Connect Instructions - Connect your laptop to Site Supervisor's Ethernet port ETH1:
1.
Under Control Panel - Network and Sharing Center, select Change adapter settings.
2.
Select the Local Area Connection port being used.
3.
Select Properties.
4.
Highlight the section Internet Protocol Version 4 (TCP/IPv4) and click Properties:
Document Part # 026-4144 Rev 8
©2018 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emerson.com for the latest technical documentation and updates.
Figure 4 - Change Adapter Settings
Figure 5 - Highlight Internet Protocol Version 4 (TCP/IPv4)
Page 2 of 10
Advertisement
Table of Contents
