Operating The On-Screen Display - Guntermann & Drunck DL-DVI-Vision-CAT series Installation And Operating Manual

Operating the on-screen display

The on-screen display is operated with the console keyboard. The following table
shows you a list of frequently used keys:
Arrow keys: Press the arrow keys
Right
Enter: Use this key to confirm inputs of open a submenu.
Esc: This key closes the displayed menu and shows the superior
menu.
A message is shown if entries are changed but not saved.
Tab key:
Use this key to move the cursor within the list field from one
menu item to the next (or vice versa).
F2: Press this key to save your settings.
The displayed menu closes after the settings are saved and the
superior menu is displayed again.
F8: Press this key to switch between the different options of a menu
item.
Ctrl+F8: Configuration settings with many options support this hotkey
to open a clearly-arranged list containing all options.
Up and
) to move the cursor between the different menu items.
Down (in some menus also
G&D DL-DVI-Vision-CAT · 20
Configuration
Left and