Selecting A Keyboard Layout For Inputs Via Osd - Guntermann & Drunck DL-DVI-Vision-CAT series Installation And Operating Manual

Configuration

Selecting a keyboard layout for inputs via OSD

If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the user module.
How to change the keyboard layout of the keyboard of the user module:
1. Press Ctrl+Num
2. Select the row
3. Under
OSD key. layout

German

English (US)

English (UK)
 French
 Spanish
 lat. American
 Portuguese
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on Configuration
3. Click on the tab
4. In the
Keyboard layout

German

English (US)
 English (UK)
 French
 Spanish
 lat. American
 Portuguese
5. Click on Save
41 · G&D DL-DVI-Vision-CAT
(default) to open the on-screen display.
Console setup and press
press to select one of the following options:
F8
KVM extender
.
and then on the tab
General
field, select between the following options:
.
Enter .
.
.
CON