Configuring Global Network Settings - Guntermann & Drunck DL-DVI-Vision-CAT series Installation And Operating Manual

Netmask:
Connection type:
5. Press to save your settings.
F2

Configuring global network settings

Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the local hotkey
work interface of the user module or use the
open the remote OSD to configure the network interface of the computer module.
2. Select the entry
Network setup
3. Select the entry
Interfaces
4. Enter the following data under
Global Press
preferences:
 Static:
 DHCP:
Hostname: Enter the device hostname.
Domain: Enter the domain the device is to belong to.
Gateway: Enter the gateway IP address.
DNS Server 1: Enter the IP address of the DNS server.
DNS Server 2: Optionally, enter the IP address of another DNS server.
5. Press F2 to save your settings.
Enter the netmask of the network.
The operational mode DHCP does not allow making entries.
Press F8 -Taste to define if the network interface and its com-
munication partner are to negotiate the connection type
automatically ( Auto ) or select one of the types available.
(default: Alt + Num ) to open the local OSD to configure the net-
and press
Enter
and press .
Enter
Main Network
to select the global preferences:
F8
uses static settings.
obtains settings from a DHCP server.
Initial configuration of the network settings
(default:
remote hotkey
.
:
G&D DL-DVI-Vision-CAT · 12
+ ) to
Ctrl Num