Installing The Computer Module; Installing The User Module - Guntermann & Drunck DL-DVI-Vision-CAT series Installation And Operating Manual

Installation

Installing the computer module

Install a compatible computer module of the digital
manual of the computer module.

Installing the user module

The remote console is connected to the
computer connected to the computer module can be operated from this console.
Establishing a connection to a local network
NOTE: If desired, connect the network interface to a local network. This enables
you to access the
log messages to this network.
Insert a category 5 twisted pair cable (or better), which is available as acces-
Network:
sory. Connect the other end of the cable to the local network.
Connecting keyboard and mouse of consoles
USB 2.0 Trans.
Transmission
NOTE: Both the keyboard and the mouse of the console can either be PS/2 or USB
devices.
Keyb./Mouse: Connect the mouse and/or the keyboard of the console to this interface.
In the default settings, you can use this interface to connect another USB
Generic:
input device or a supported display or tablet.
5 · G&D DL-DVI-Vision-CAT
web application from this network and to send sys-
Config Panel
Serial
USB 2.0 Devices
DVI-D DL Out Micro In Speaker
series as described in the
Vision
DL-DVI-Vision-CAT-CON
USB Devices
Ident. Power Status
Red. Trans.
Main System
Mouse
Generic
Keyb./Mouse Keyb. Red. Power
user module. The
Network
Console Service
Video
K/M