Using The Remote Control; Power On, Power Off And Standby; Switching Inputs - BenQ DV2050 User Manual

Using the Remote Control

Power on, Power off and Standby

Switching Inputs

14
Using the Remote Control
Turning on the TV
1. After the power cord is plugged into a wall outlet, the
TV will turn on and enter standby mode automatically,
and the power indicator will light up in red.
2. Press the button on the TV, or press the POWER
button on the remote control. The TV will turn on, and
the power indicator will light up in green.
3. The TV will automatically search for a signal. If the set is
already connected to a signal source, the TV will display
that signal.
Turning off the TV
Press the button on the TV again, or press the POWER
button on your remote control again, and the TV will go
into standby mode. (The power indicator will turn red).
1.Turn on all connected equipment.
2. Press the INPUT button on your TV or press the
INPUT button on your remote control to select input
signal.
Press the input button repeatedly until your desired input
is displayed. The sequence is as follows- TV, VIDEO, Y C
P C /P , TV, VIDEO...
B R R
/
B