Adjusting Audio; Changing Channels - BenQ DV2050 User Manual

Adjusting Audio

Changing Channels

Adjusting the volume
button on your TV or press the VOL +
1. Press the VOL
button on your remote to increase volume. The volume
indicator will increase in length as volume rises.
button on your TV, or press the VOL -
2. Press the VOL
button on your remote to decrease volume. The volume
indicator will decrease in length as volume falls.
Mute setting
1. Press the MUTE button on your remote control to
temporarily cut off the sound.
2. Press the MUTE button once more, or press the Volume
or Power button on your TV or the remote control to
restore the sound level.
MTS (TV Sound selection)
Press the MTS button on your remote control to toggle
among "Stereo", "SAP (Second Audio Program)", or
"Mono" reception.
Using the Channel selection buttons on the Remote
Control to Change Channels
• To select a single- or double-digit channel, press the
corresponding channel selection buttons on the remote
control. For example, to select channel 8, press the "0"
and "8" channel selection buttons on the remote control.
• To select a triple-digit channel, press the
on the remote control followed by the rest of the digits.
For example, to select channel 102, press the
ton, and then press the "0" and "2" buttons on the remote
control.
Using the CH / buttons to sequentially change
channels
Press CH or CH on your remote control, or press CH
or CH on the TV to sequentially select the TV chan-
nels available in your area.
Using the channel button to return to the previous chan-
nel.
To return to the previous viewed channel, press the
RECALL button on your remote control.
Using the Remote Control
button
but-
15