Main Unit (Rear View) - BenQ DV2050 User Manual

3 Channel ( )/( )
4 Volume ( )/( )
5 MENU

Main Unit (Rear View)

No. Name
1 ANTENNA/CABLE Connect your antenna (not provided) to this input.
2 AV1
3 COMPONENT
4 AUDIO OUT
5 DOWNLOAD
6 AC INLET
4
Getting to Know Your TV
• These two buttons allow direct selection of channels.
• When the OSD main screen is active, pressing these buttons allows
selection of options.
• Press Volume to increase the volume, or Volume
• When the OSD main screen is active, pressing these buttons allows
selection of settings.
Press this button to display the on-screen display (OSD) menu. Press
this button once again to close the OSD menu.
4 3
6 5
Description
• VIDEO (Composite (AV) signal input, RCA connector): Connect
the Composite video output of your AV device here.
• AUDIO(Audio input, L/R): Connect the audio out of your AV
device here. This input is used common to both AV and S-VIDEO
input.
• S-VIDEO (S-VIDEO input): Connect the S-VIDEO OUT of your
AV device here.
• Y C /P C /P (Y C /P
B B R R B
image output of your AV devices or HDTV decoder here. The Y
(green) connector can also be used as a second composite signal
input.
• AUDIO(Audio input, L/R): Connect the audio out of your AV
device here.
Connect the audio input of an amplifier or here.
This terminal is for service purpose only.
Connect the power cord (provided) to this input.
2 1
C /P input): Connect the component
B R R
to decrease it.