Botex DMX DC-192 User Manual page 43

Deleting chase
5. Press [Auto/Del] to delete the chase step. When the step is deleted, all LEDs flash three
times.
6.
Repeat steps 4 and 5 to delete further chase steps.
7.
Hold down [Program] for about two seconds or until the PROG indicator stops flashing
on the display. As soon as the blackout indicator flashes, the programme mode is deacti‐
vated.
1.
Hold down [Program] for about two seconds or until the PROG indicator flashes on the
display. When the indicator flashes, the recording mode is active and you can release the
button.
2. To select a chase press the corresponding [CHASE] button (1 to 12). The corresponding
LED lights up.
3.
Hold down [Auto/Del] and press also the [CHASE] button that you have selected in step 2.
When the chase is deleted, all LEDs flash three times.
4.
Repeat steps 2 and 3 to delete further chases.
5.
Hold down [Program] for about two seconds or until the PROG indicator stops flashing
on the display. As soon as the blackout indicator flashes, the programme mode is deacti‐
vated.
Operating
DMX DC-192
43
DMX controller