Botex DMX DC-192 User Manual page 35

8.3.3 Copying a scene
7. Hold down [Program] for about two seconds or until the PROG indicator stops flashing
on the display. As soon as the blackout indicator flashes, the programme mode is deacti‐
vated.
1. Hold down [Program] for about two seconds or until the PROG indicator flashes on the
display. When the indicator flashes, the recording mode is active and you can release the
button.
2. Use the scene bank UP / DOWN buttons to select the scene bank that contains the scene
you want to copy.
3.
Press the [SCENE] button (1 to 8) of the scene you want to copy.
4. Use the scene bank UP / DOWN buttons to change the scene bank.
5. Press [Midi/Rec] and then the [SCENE] button the scene you wand to copy. All LEDs flash
three times when the scene has been copied.
6.
Hold down [Program] for about two seconds or until the PROG indicator stops flashing
on the display. As soon as the blackout indicator flashes, the programme mode is deacti‐
vated.
Operating
DMX DC-192
35
DMX controller