Bluetooth Mode - Newland BS10R Sepia Quick Start Manual

Ring Barcode Scanner
Initialization Setting
During usage,if you scan other set-up barcode by mistake and the
scanning cannot perform as normal way, you can scan the initialization
set-up barcode to revert.
Pair with Android, iOS operating system
smartphones or tablets or PC terminals
that with Bluetooth function
(Bluetooth Pairing Steps)
A.Start the scanner and long press for 8 seconds to enter
"Bluetooth HID Pairing Mode" .
B: Turn on Bluetooth in the device to detect bluetooth device
named with "Barcode Scanner HID".Click "Barcode Scanner
HID" to enter pairing status.: If pair successfully, you will hear a beep.
Note: When the scanner enters the state of matching and it does not
pair withbluetooth successfully within 1 minute, there is 2 times long
low sound indicated failing match and return to scanning mode.
&Version Information
Initialization Setting
Display Version Information
HID Pair Set-up Barcode
8