Firmware Update - dji MATRICE M210 RTK V2 User Manual

Operating Environment
Intelligent Flight Battery (TB55-7660mAh-22.8V)
Capacity
Voltage
Battery Type
Energy
Net Weight (Single One)
Operating Temperature
Storage Temperature
Charging Temperature
Max Charging Power
Charger (IN2C180)
Voltage
Rated Power
Charging Hub (IN2CH)
Input Voltage
Input Current

Firmware Update

Use the DJI Pilot app or the DJI Assistant 2 for Matrice to update the remote controller, aircraft and
other connected DJI devices.
For the Zenmuse X5S, X4S and X7, the aircraft and gimbal firmware will be updated simultaneously
via DJI Assistant 2 for Matrice or the DJI Pilot app.
For the Zenmuse Z30, XT and XT 2, only aircraft firmware can be updated via DJI Assistant 2 for
Matrice or the DJI Pilot app. Gimbal firmware must be updated via a microSD card.
Using DJI Pilot
1. Ensure that there is good connection between the aircraft and remote controller and other DJI
devices used with the aircraft such as a D-RTK 2 Mobile Station for Matrice Series, and that all
the devices are powered on.
2. Go to the app. A prompt will appear if new firmware is available for download. Follow the
on-screen instructions to update the firmware. Make sure to connect to the Internet when
downloading the firmware.
Using DJI Assistant 2 for Matrice
Connect the remote controller to the software and then run a firmware update for all the connected
DJI devices. Users can also connect each device to the software to update its own firmware.
1. Power on the device and connect it to the software.
2. Click the corresponding device name and then the firmware update tag.
Large, diffuse, and reflective obstacles (reflectivity >10%)
7660 mAh
22.8 V
LiPo 6S
174.6 Wh
Approx. 885 g
-4° to 122° F (-20° to 50° C)
Less than 3 months: -4° to 113° F (-20° to 45° C)
More than 3 months: 72° to 82° F (22° to 28° C)
41° to 104° F (5° to 40° C)
180 W
26.1 V
180 W
26.1 V
6.9 A
MATRICE 200 SERIES V2 User Manual
©
2019 DJI All Rights Reserved.
71