Operating the TP-580RA HDMI
Line Receiver
Controlling A/V Equipment via an IR Remote Control
You can use an IR remote-control transmitter (that is used for controlling a peripheral device,
for example, a Blu-ray disk player) to send commands from the receiver system. To use an IR
remote control transmitter, connect the Kramer IR sensor cable at one end, and the Kramer
IR emitter cable at the other end.
The example in
Figure 4
control via the
TP-580RA
TP-580RA
and an IR emitter is connected between the TP-580T and the Blu-ray disk player.
The Blu-ray disk player IR remote control sends an IR command signal while pointed at the
external IR sensor. The IR signal is passed over the HDBT link and the IR emitter to the Blu-
ray disk player which responds to the IR command signal sent.
Figure 4: Controlling a Blu-ray Player with IR Remote Control via the
TP-580RA – Operating the TP-580RA HDMI Line Receiver
illustrates how to control a Blu-ray disk player using an IR remote
that is connected to the TP-580T. The IR sensor is connected to the
Kramer Electronics Ltd.
TP-580RA
8