Contents Contents Introduction Getting Started Quick Start Overview Using Twisted Pair Cable About HDCP Defining EDID About HDMI Recommendations for Achieving the Best Performance Your HDMI/RS-232/IR Line Transmitter / Receiver Your TP-573 HDMI/RS-232/IR Line Transmitter Your TP-574 HDMI/RS-232/IR Line Receiver Connecting the TP-573 and TP-574 Using the RS-232 ports to control a device via a PC Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors...
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products 2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
1U rack space with the optional RK-3T rack adapter 1 Compatible with a Kramer transmitter and via a Kramer external remote receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE 2 Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-...
Overview Using Twisted Pair Cable Kramer engineers have developed special twisted pair cables to best match our digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the Kramer: BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer: BC-DGKat7a23 (CAT 7a 23 AWG cable). These specially built cables significantly outperform regular CAT 5 / CAT 6 / CAT 7a cables.
Your HDMI/RS-232/IR Line Transmitter / Receiver Supports standard, enhanced, high-definition video, and multi-channel digital audio on a single cable Transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements and requirements Benefits consumers by providing superior, uncompressed digital video quality via a single cable , and user-friendly connector Is backward-compatible with DVI (Digital Visual Interface)
Lights when an HDMI input device is connected OUT LED Lights when an HDMI output device is detected ON LED Lights when receiving power 1 Compatible with a Kramer transmitter and via a Kramer external remote IR receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Lights when an HDMI input device is connected OUT LED Lights when an HDMI output device is detected ON LED Lights when receiving power 1 Compatible with a Kramer transmitter and via a Kramer external remote IR receiver: C-A35M/IRR or C-A35M/IRE or C-A35M/2IRE...
TP-573 to the LINE IN RJ-45 twisted pair connector. 5. The 12V DC power supply to the TP-573 (not shown in Figure 1 See section 2 Using the Kramer BC-DGKat524 and BC-DGKat623 cables, respectively KRAMER: SIMPLE CREATIVE TECHNOLOGY...
2 For a crossed connection, connect pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5. If a shielded cable is used, connect the shield to pin 5 3 CAT 6 or similar (heavier gauge) cabling can also be used KRAMER: SIMPLE CREATIVE TECHNOLOGY...
0.3kg (0.67lbs) approx. ACCESSORIES: 12V DC power supply OPTIONS: RK-3T 19” rack mount, Kramer remote external receiver , Kramer BC-DGKat524 (CAT 5 24AWG), BC-DGKat623 (CAT 6 23AWG) and BC-DGKat7a23 (CAT 7a 23 AWG) cables 1 Specifications are subject to change without notice...
Page 14
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 15
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.