FLIR Duo Pro R User Manual page 50

FLI R Duo P ro R Us er Gui de
FLIR Commercial Systems, 2017. All rights reserved worldwide. No parts of this man ua l , in whole or in part, may
be copied, photocopied, translated, or transmitted to any electronic medium or machine-readable form w i t h o u t the
p r i o r w r i t t e n permission of FLIR Commercial Systems
Names and m a r k s appearing on the p r o d u c t s herein are either registered trademarks or trademarks of FLIR
Commercial Systems and/or its subsidiaries. All other trademarks, trade names, or company names referenced
herein are used for identification only and a r e the property of their respective owners.
Liberation fonts are copyright 2009 by RedHat and a re used under authority of the G N U public license.
Information about
https://www.redhat.com/promo/fonts/.
This product is protected by patents, design patents, patents pending, or design patents pending.
If you have q u e s t i o n s that are not covered in this ma n ua l , or need service, contact FLIR Commercial Systems
Technical Support at SBA-Cores@�lir.com
This documentation and the requirements speci�ied herein are subject to change without notice.
This equipment must be disposed of as electronic waste.
Contact your nearest FLIR Commercial Systems, Inc. representative for instructions on how to
return the p r o d u c t to FLIR for proper disposal.
FCC Notice. This device is a subassembly designed for incorporation into other products in order to provide an infrared camera
function. It is not an end-product �it for consumer use. When incorporated into a host device, the end-product will generate, use,
and radiate radio frequency energy that may cause radio interference. As such, the end-product incorporating this subassembly
must be tested and approved under the rules of the Federal Communications Commission (FCC) before the end-product may be
offered for sale or lease, advertised, imported, sold, or leased in the United States. The FCC regulations are designed to provide
reasonable protection against interference to radio communications. See 47 C.F.R. §§ 2.803 and 15.1 et seq.
Industry Canada Notice. This device is a subassembly designed for incorporation into other products in order to provide an infrared
camera function. It is not an end-product �it for consumer use. When incorporated into a host device, the end-product will generate,
use, and radiate radio frequency energy that may cause radio interference. As such, the end-product incorporating this subassembly
must be tested for compliance with the Interference-Causing Equipment Standard, Digital Apparatus, ICES-003, of Industry Canada
before the product incorporating this device may be: manufactured or offered for sale or lease, imported, distributed, sold, or leased
in Canada.
Avis d'Industrie Canada. Cet appareil est un sous-ensemble conçu pour être intégré à un autre produit a�in de fournir une fonction
de caméra infrarouge. Ce n'est pas un produit �inal destiné aux consommateurs. Une fois intégré à un dispositif hôte, le produit �inal
va générer, utiliser et émettre de l'énergie radiofréquence qui pourrait provoquer de l'interférence radio. En tant que tel, le produit
�inal intégrant ce sous-ensemble doit être testé pour en véri�ier la conformité avec la Norme sur le matériel brouilleur pour les
appareils numériques (NMB-003) d'Industrie Canada avant que le produit intégrant ce dispositif puisse être fabriqué, mis en vente
ou en location, importé, distribué, vendu ou loué au Canada.
EU Notice. This device is a subassembly or component intended only for product evaluation, development or incorporation into
other products in order to provide an infrared camera function. It is not a �inished end-product �it for general consumer use. Persons
handling this device must have appropriate electronics training and observe good engineering practice standards. As such, this
product does not fall within the scope of the European Union (EU) directives regarding electromagnetic compatibility (EMC). Any
end-product intended for general consumer use that incorporates this device must be tested in accordance and comply with all
applicable EU EMC and other relevant directives.
these fonts and
for additional information prior t o returning a camera.
Duo Pro R User Guide, Rev. 1.0
Informa�on on this page is subject to change without no�ce
t h e G N U public license can b e found at:
50