Table of Contents
Advertisement
FLI R
Duo P ro R Us er Gui de
The Duo Pro R camera utilizes FLIR's patented Multi Spectral Dynamic Imaging (MSX) technology
5.1.4 MSX
found in FLIR's Duo and FLIR One products. It provides extraordinary detail in real-time thermal
images by embossing visible camera image information onto thermal video and stills. MSX produces
exceptional thermal clarity and ensures easier target identi�ication without compromising
radiometric data. The UAS App provides the user with control over the strength of the MSX overlay,
as well as horizontal and vertical alignment of the two streams.
Please note that the MSX feature is only available at a digital zoom setting of 100% for the 336
camera con�igurations, and 100% and 200% zoom for the 640 camera con�igurations.
Figure 12. MSX Parameter Adjustment
To maintain optimum performance, thermal imaging cameras occasionally must perform an
5.1.5 FFC
internal calibration, or Flat Field Correction (FFC). This is accomplished using an internal shutter
and takes less than 1 second. A warning is provided onscreen 1-2 seconds prior to this event and
can be seen in the upper right-hand corner of the live image. During re-calibration, an audible "click"
can be heard and live video is momentarily frozen. This function takes place automatically, based
on internal camera parameters, and can also be manually initiated by the user through one of the
available interfaces.
A user may �ind recalibrating prior to taking critical measurements will ensure best performance.
Duo Pro R cameras have up to 4x digital zoom (slider setting of 400%) on the IR output, with
5.1.6 Zoom
associated on-screen symbology. For example, a Duo Pro R 336 in NTSC uses the center 320 x 240
pixels of the sensor for analog video. 2x (slider setting of 200%) zoom mode will interpolate the
Duo Pro R User Guide, Rev. 1.0
24
Informa�on on this page is subject to change without no�ce
Advertisement
Table of Contents
