Table of Contents
Advertisement
FLI R
Duo P ro R Us er Gui de
-
To (re)enable Bluetooth, simply press the Bluetooth button on the top of the camera.
-
Factory Reset: Simultaneously pressing both the Record and Bluetooth buttons for 12
seconds will cause the system to reboot and do a hard reset, restoring all factory
default settings.
Note: The �irst time the camera is powered up, FLIR recommends verifying it has the
latest �irmware revision. Please see Appendix A for update instructions.
Duo Pro R User Guide, Rev. 1.0
Informa�on on this page is subject to change without no�ce
18
Advertisement
Table of Contents
