Advertisement
Then install the pull on the quick rod adjuster and
hinge. Adjust pull rod's length and tighten the screw.
Put hook and loop tape near battery using foam glue.
Connect servo, ESC with receiver. Then put receiver
on tape.
Fix battery use battery cable and block the cover.
Put hook and loop tape on fuselage using foam glue.
Then install battery. Let battery cable through the hole
to fix battery.
C of G is on the front of the motor 8cm as shown in the
picture above.
IPP J20 need set delta wing mixed control on radio
(Elevator and aileron mixed control), it's very stable
when flying. You can also add servo on canard wing
to make flying more agility.
6
Advertisement
