Section 3: Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. Please
note that PPPoE must be disabled to make any changes on this page; refer to "PPPoE" on page 32 for more details. After making
any changes, click the Save button to save your changes.
DHCP:
Select this connection if you have a DHCP server running on
your network and would like your camera to obtain an IP address
automatically.
Static IP
If you choose DHCP, you do not need to fill out the IP address settings.
Client:
You may obtain a static or fixed IP address and other network
information from your network administrator for your camera. A
static IP address may simplify access to your camera in the future.
IP address:
Enter the fixed IP address in this field.
Subnet mask:
This number is used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
Default
Enter the router/gateway used to forward frames to destinations in
router:
a different subnet. Invalid router/gateway settings may cause the
failure of transmissions to a different subnet.
Primary DNS:
Enter the primary domain name server for translating domain
names to IP addresses.
Secondary
Enter the secondary domain name server for translating domain
DNS:
names to IP addresses.
D-Link DCS-4802E User Manual
Settings
Network Settings
LAN Settings
31