D-Link DCS-4802E User Manual page 49

Section 3: Configuration
Event
Create and schedule up to three events with their own settings here. After making any changes, click the Save button
to save your changes.
Event name: Enter a name for the event.
Enable this Toggle this to activate this event.
event:
Priority: Set the priority for this event. Events with higher priority will be
executed first.
Delay for: Specify the delay time before allowing this event to be triggered
again. This is used for both motion detection events and event
triggers.
Trigger
Video Motion Selecting this will trigger the event when motion is detected during
Detection: live video monitoring. Make sure you have enabled motion detection
and specified what part of the image to monitor for motion. For
more details, refer to "Motion Detection" on page 52.
Periodic: Selecting this will trigger the event in specified intervals. The trigger
interval unit is in minutes.
System Boot: Selecting this will trigger an event when the system boots up.
D-Link DCS-4802E User Manual 49