Section 3: Configuration
This wizard will guide you through a step-by-step process to configure your camera
and connect it to the Internet. Click Next to continue.
Step 1:
Select how the camera will connect to the Internet.
• If your camera is connected to a router, or you are unsure how your camera will
connect to the Internet, select DHCP.
• Select Static IP Client if your Internet Service Provider has provided you with
connection settings, or if you wish to set a static address within your home
network. Enter the correct configuration information and click Next to continue.
• If you are using PPPoE, select PPPoE and enter your user name and password.
Click Next to continue.
D-Link DCS-4802E User Manual
Network Setup Wizard
27