Section 3: Configuration
The DCS-4802E has a comprehensive event management system that lets you configure the camera to perform certain actions when
an event occurs. For example, when motion is detected, you can have snapshots sent to an e-mail address. You can also configure
the camera to take regular video recordings according to a schedule you define. Detailed information for the following steps can be
found in the following pages.
Step 1:
Select your destination Server and Media type
Server
Media
D-Link DCS-4802E User Manual
Event Management
Event Management
•
E-mail
•
FTP
•
Network Storage
•
Snapshot
•
Video Clip
•
System Log
When an event is triggered:
Event
Step 2:
Event
Action
Action
Select your Trigger event and Action
•
Video motion detection
•
Periodic
•
System boot
•
Event schedule
•
Server (can be any pre-selected
media such as snapshot, video
clip, or system log)
Server 1:
E-mail
Server 2:
FTP
44