Settings; Network Settings - D-Link Vigilance DCS-4714E User Manual

Section 3: Configuration
Use this section to configure the network connections for your camera. All relevant information must be entered accurately. Please note that PPPoE
must be disabled to make any changes on this page; refer to "PPPoE" on page 34 for more details. After making any changes, click the Save
button.
DHCP
Select this if you have a DHCP server running on your network and would
like your camera to obtain an IP address automatically. If you choose DHCP,
you do not need to fill out the IP address settings.
IP Address
Enter a static IP address in this field.
Subnet Mask
This number is used to determine if the destination is in the same subnet.
The default is 255.255.255.0.
Default
Enter the gateway used to forward frames to destinations in a different
Gateway
subnet.
D-Link Vigilance H.265 Outdoor Bullet Camera User Manual

Settings

Network Settings

LAN Settings
33