D-Link DCS-4802E User Manual page 35

Section 3: Configuration
Use this section to configure your camera's RTSP and multicast stream settings. After making any changes, click the Save button to
save your changes.
RTSP
Authentication: Choose to enable or disable RTSP digest encryption. Digest
encryption uses MD5 hashes.
RTSP Port: The port number that you use for RTSP streaming to mobile devices,
such as mobile phones or tablets. The default port number is 554.
Access Name for You may specify the address of a particular stream. For instance,
Stream 1/2: live1.sdp can be accessed at rtsp://x.x.x.x/live1.sdp where the x.x.x.x
represents the ip address of your camera.
Multicast
Multicast for The DCS-4802E allows you to multicast each of the available streams
Stream 1/2: via a group address and specify the TTL value for each stream. Enter
the port and TTL settings you wish to use if you do not want to use
the defaults.
D-Link DCS-4802E User Manual
RTSP and Multicast
35