Before First Use; Fill The Water Tank - TEFAL Steam N'Light User Manual

Description
1 Lid
2 Steam baskets
3 Cooking trays
4 Cake mould
5 Rice bowl
6
Juice collector
7 Filling inlet
8
Water tank
9 Power supply base
Preparation

Before first use

• Clean the water tank with a non-abrasive sponge
exterior of the electronic base.
• Wash all detachable parts (bowls, rice bowl, juice collector, removable
trays, cover, cake mould) with warm water and washing up liquid. Rinse
and dry.
• You can wash all parts in the dishwasher except the electronic base.
Never place any
seasoning or liquid
other than water
in the water tank.
Do not fill the
water tank by
placing it directly
under a tap; use a
container with a
spout.
Fitting the detachable elements
• Place the juice collector on the water tank
• Clip the trays onto the bowls
• Place the bowl(s) 1, 2 and 3 on the juice collector
• Fit the lid.
• When you use the rice bowl and cake mould accessories, position them
directly on the trays in the bowl.
• Check that the bowls are correctly positioned.
2
• Pour cold water directly into the water tank up to the maximum level
- fig.2
(1.5 litre) .
• Use fresh water with each use and check that the water tank is filled to
the maximum level.
ALWAYS ENSURE THERE IS WATER IN THE WATER TANK BEFORE
SWITCHING ON.
- fig.4.
10 Controls
a Programme selector
b Button
c Screen with cooking times
d Button
e
Frozen food button with indicator
f Keep food warm indicator
g
Start/Stop button
- fig.1

Fill the water tank

- fig.3.
- fig.5.
and the Never use a
scourer, especially
on the heating
element. Never
immerse the
electronic base.
Only 1 bowl can
be used directly
on the juice
collector.