Before Using For The First Time - TEFAL KIDS KD400 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 36
F
Thank you for buying this TEFAL appliance, which is intended for domestic use only. Read the
instructions in this leaflet carefully and keep them safe.
For your safety, this product conforms to all applicable standards and regulations (Low Voltage Directive,
Electromagnetic Compatibility, Food Compliant Materials, Environment, ...).
NL
TEFAL has an ongoing policy of research and development and may modify these products without prior
notice.
Prevention of accidents at home
D
If you do use your appliance
in the company of children:
I
• always use it under adult
supervision;
• never touch the hot
surfaces of the appliance;
S
• never leave the appliance
unattended when plugged
in or in use.
FIN

Before using for the first time

Never submerge the
DK
appliance's base and cord in
water.
N
GB
Assembly
TR
Tower
E
Base
P
RUS
UA
Connection and preheating
PL
Never use on a flexible
surface such as a rubber or
paper tablecloth.
Never place the appliance
directly on a fragile support
(glass table, tablecloth,
varnished furniture, etc.).
36
• For a child, even a slight burn may sometimes be serious.
• As they grow up, teach your children to be careful around hot
appliances in the kitchen.
• If an accident occurs, rinse the burn immediately with cold water
and call a doctor if necessary.
• Remove any packaging, stickers or accessories inside and outside
the appliance.
• Wash all the parts of the tower with hot water and washing-up
liquid.
• Also wash the base of the appliance A6 (stainless steel bowl) with
a sponge dampened with hot water and washing-up liquid.
• Carefully dry all parts before use.
A1, A2, A3, A4, A5 and A6.
• Stand the tube of the tower A4 up vertically (B).
• Slide tower part A3 then part A2 onto the tube.
• Place the "hat" A1 on the top of the tower. Turn it clockwise to fit
the lid on the tube properly.
• Place the base of the fountain A6 on a flat, stable, heat resistant
surface.
• Position the feed screw A5 in the centre of the base (C).
• Slide the tower A4 onto the feed screw A5. Fit the tower and the
base together with the 3 stems in the centre of the base.
• Lastly, adjust the front legs of the tower so that it stands straight
and the fountain's flow is even.
• Place the appliance on a solid surface.
• To keep the appliance from overheating, do not place it in a corner
or against a wall.
• Completely unroll the cord.
• Check that your electric supply is compatible with the power
and the voltage indicated under the appliance.
• Connect the appliance to a wall socket with an earth
connection.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kd400083

Table of Contents