FUTABA SkyLeaf Classic Instruction Manual page 21

This page is an explanation of when to make it into an engine.
8-3
Fuel piping and silencer：GP kit only
1
● Piping of fuel is done.
To carburetor
2
● Install the Silencer. For O.S. two-cycle engines, extend with the O.S.
Silencer EX adapter.
● Cut the side plate of
the screw part.
Pressure pipe
Nipple
Fuel stopper / Filler neck
Put out outside
● Install the Silencer with the
M3 screw included with the
Silencer EX adapter.
(It is unnecessary in case of EP.)
Fuel tank
Air tube
Weight
3
● Attach the L-shaped bent wire to the needle.
Sky Leaf Tip
21