FUTABA SkyLeaf Classic Instruction Manual page 17

This page is an explanation of the case of electric motor.
1 7
● Fix the Motor with four M3 Nut, M3 Washer and
M3 × 20 Hexagon bolt.
8-2 Installation of Battery and Motor controller：EP kit only
1
● Install the Battery · Motor controller using Hook-and-Loop Tape
inside the fuselage as shown.
Sky Leaf Tip
2
● Connect the wiring of the Motor controller to CH3 of the Receiver.
■ U n e x p e c t e d h i g h s p e e d
rotation of the propeller may
cause a serious injury.
(It is unnecessary in the case of engine.)
1 8
● If this interferes, advance the spacer between the
mount and the motor.
● Motor controller is mounted on the side plate
of the fuselage using Hook-and-Loop Tape.
● Perform the setting according to the
instructions of the motor controller.
17