Boot Up Numlock Status; Gate A20 Option; Typematic Rate Setting; Typematic Rate (Chars/Sec) - Advantech PCA-6275 Manual

3.4.5 Boot Up NumLock Status

The default is "On".
On
Off

3.4.6 Gate A20 Option

Normal
Fast (Default)

3.4.7 Typematic Rate Setting

The typematic rate determines the characters per second accepted by
the computer. The Typematic Rate setting enables or disables the
typematic rate.

3.4.8 Typematic Rate (Chars/Sec)

BIOS accepts the following input values (characters/second) for
typematic rate: 6, 8, 10, 12, 15, 20, 24, 30.

3.4.9 Typematic Delay (msec)

Typematic delay is the time interval between the appearance of the
first and second characters, when holding down a key. The input
values for this category are: 250, 500, 750, 1000 (msec).

3.4.10 Security Option

This setting determines whether the system will boot up if the
password is denied. Access to Setup is, however, always limited.
System
Setup
PCA-6275 User's Manual
36
Keypad boots up to number keys.
Keypad boots up to arrow keys.
The A20 signal is controlled by the keyboard
controller or chipset hardware.
The A20 signal is controlled by Port 92 or the
chipset specific method.
The system will not boot, and access to Setup will be
denied if the correct password is not entered at the prompt.
The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.