Setting The Clock; Select /Switch Off /Switch On Each Compartment; Switch Off Of One Compartment; Ambient Temperature Function - Electrolux ERZ36700 User Manual

Setting the Clock

The Clock function is activated by
pressing key +/- (C/C). Set the hours'
first, confirm by pressing key E, then
the minutes, confirm by pressing key
E. Note! You must make new time
setting after power failure.
Select /Switch off /Switch on
each compartment
The temperature may be regulated by
pressing the key (B) to select the
compartment and than the key
(C/C) to set the desired temperature.
By pressing the key B the current tem-
perature setting flashes on the indica-
tor and by pressing the key B again it
is possible to change it.
You confirm the choice of the tempe-
rature either by pressing the key E,
(you will hear the buzzer) or by waiting
for some seconds (you will not hear
the buzzer).
Then the indicator shows the inside
compartment temperature again.
The newly selected-temperature must
be reached after 24 hours.
It is not necessary to set the tempera-
ture again after long periods of non
use as the temperature remains
stored.
Attention!
During the stability period by the first
starting the temperature displayed
cannot correspond to the setting
temperature. During this time it is
possible that the temperature
displayed is different than the setting
temperature.
9

Switch off of one compartment

To switch off one compartment press
the key (D) until the compartment is
selected and then press the key (A),
the count down will follow.

Ambient Temperature Function

The ambient temperature function is
activated by pressing key D (several
times if necessary) until the corres-
ponding icon appears
In this condition the selected tempera-
ture is the ambient temperature.
You must confirm the choice by
pressing key E within a few seconds.
You will hear the buzzer and the icon
will remain lit.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon will flash and then
key E.

Child Lock Function

The Child Lock function is activated by
pressing key D (several times if neces-
sary) until the corresponding icon
appears .
You must confirm the choice by pres-
sing key E within a few seconds. You
will hear the buzzer and the icon will
remain lit.
In this condition any possible operation
through the keys does not cause any
change as long as this function is
activated.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon flashes and then
key E.
.