Installation Of Carbon Filter; Installing The Cabinet - Electrolux ERZ36700 User Manual

Installation of carbon filter

On delivery the carbon filter is placed
in a plastic bag to secure the length of
the carbon filter life. The filter should
be placed behind the grill before the
cabinet is turned on.
The cover can be opened by
simultaneously pressing the lever on
the right of the grill (1) and turning the
cover outward (2). The carbon filter is
then mounted in the slot found in the
back of the cover.
The filter should be handled carefully
so fragments do not loosen from the
surface.
1
2

Installing the cabinet

Make sure that the power plug is not
squashed or damaged by the back of
the product.
· A damaged
overheat and cause a fire.
Do not place heavy articles or the
product itself on the power cord.
· there is a risk of a short circuit and
fire.
If the power plug socket is loose, do not
insert the power plug.
· there is a risk of electric shock or fire.
23
3
power plug may
To obtain the best performance from the
cabinet, ensure:
· the cabinet is placed in a dry, cool
place and is not exposed to direct
sunlight.
· the cabinet is not placed close to a
source of heat, e.g. a cooker or
dishwasher.
· the cabinet is level. The cabinet
should not lean against any wall. If
necessary adjust the feet using the
adjustment spanner supplied.
· there is good air circulation around
the cabinet and that the air channels
below and behind the cabinet are not
blocked. The ventilation space above
the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard.
In this case, the space behind the
cupboard must be at least 50 mm deep.
a)
b)
50mm