Electronic Display Panel; Setting The Clock - Electrolux 1458528 User Manual

10 controlling the temperature/other display panel features electrolux side by side refrigeration
tips and information
Temperature sensors
Avoid loading food against your freezer temperature sensor.
Doing so may adversely affect freezer temperatures. If warm
food is inadvertently loaded against the sensor, it may also
set off the freezer temperature alarm up to 50 minutes after
the food is loaded against the sensor (see Diagrams below).
freezer temperature sensor
model ESE6107 shown
Note: Product illustrations demonstrate features that
may not be completely in line with all current products.

Electronic display panel

Ice and water models
Electronic display panel
The electronic display panel consists of an LCD display
with white backlighting and 6 push buttons. When the
power is first turned on, you will see the default settings.
The white backlight will turn on when buttons are pushed,
dispensing paddles used or the door is opened.
Note: the electronic Display Panel varies according to the
model of refrigerator purchased. the above and following
diagrams are only representative of the different types of
panels available. Not all models will have all features listed.
Note: If no buttons have been pressed for approximately
60 seconds, there may be a delay of up to 2 seconds before
the display reacts. this is normal and is to prevent accidental
changes to settings.
Setting the clock – ice and water models only
1. Press and hold the clock button down for two seconds.
Hours and minutes will then appear on the display.
2. Press the fast freeze button to advance the hours.
(Hold the button down for continuous and fast advance).
3. Press the eco/vacation button to advance the minutes.
(Hold the button down for continuous and fast advance).