Table of Contents
Advertisement
Unpacking
Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling. For more information,
contact your local city office or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Remove the transport supports
Remove the tape and the transport supports from
the door sides
·
inside the door hinges
·
the shelves
·
Remove the transport support on the glass shelf by
pushing the support forward along the edge of the
shelf until it stops. Take hold of the rear edge of the
glass shelf and pull the shelf and transport support
forward until the shelf tilts and the transport support
can be removed. Some models are fitted with a
silencing pad under the cabinet. Do not remove this
pad.
Installation of distance
Assemble the attached distance on the back side of
the panel according to the illustration.
Cleaning
Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.
Installation of carbon filter
On delivery the carbon filter is placed in a plastic
bag to secure the length of life of the carbon filter.
The filter should be placed behind the grill before
the cabinet is turned on.
The cover can be opened by simultaneously pressing
the lever on the right of grill (1) and turning the
cover outward (2). The carbon filter is then mounted
in the slot found in the back of the cover.
The filter should be handled carefully so fragments
don't loosen from the surface.
1
2
79
3
Electrolux 818 34 37-05/5
Hide quick links:
Advertisement
Table of Contents
