Yamaha R25 Series Owner's Manual page 78

2
1
1. Starter relay cover
2. Starter relay coupler
3. Main fuse
4. Spare main fuse
4. Disconnect the starter relay cou-
pler by pressing from both sides.
5. Connect the starter relay coupler,
and then slide the cover to its orig-
inal position.
6. Place the tray in its original posi-
tion, and then install the quick fas-
teners.
7. Install the passenger seat.
TIP
To access the fuse box, remove the
center cover. (See page 4-16.)
Periodic maintenance and adjustment
4
1
3
1. Fuse box
6
1. Ignition fuse
2. Signaling system fuse
3. Headlight fuse
4. Backup fuse (for clock)
5. Radiator fan motor fuse
6. Spare fuse
If a fuse is blown, replace it as follows.
7-33
1. Turn the key to " " and turn off
2. Remove the blown fuse, and then
Specified fuses:
1
2
3
4
5
3. Turn the key to " " and turn on
4. If the fuse immediately blows
the electrical circuit in question.
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
Main fuse:
30.0 A
Headlight fuse:
7.5 A
Signaling system fuse:
15.0 A
Ignition fuse:
15.0 A
Radiator fan motor fuse:
7.5 A
Backup fuse:
7.5 A
the electrical circuit in question to
check if the device operates.
again, have a Yamaha dealer
check the electrical system.
7