Indicator Lights And Warning Lights - Yamaha R25 Series Owner's Manual

Instrument and control functions
To unlock the steering
1 2
4
1. Push.
2. Turn.
From the "LOCK" position, push the
key and turn it to " ".
Indicator lights and warning
lights
123 4
MPG mile
1. Engine trouble warning light "
2. Oil pressure warning light "
3. Left turn signal indicator light "
4. Neutral indicator light " "
5. Shift timing indicator light
6. Right turn signal indicator light "
7. High beam indicator light " "
Turn signal indicator lights "
and " "
Each indicator light will flash when its
corresponding turn signal lights are
flashing.
4-2
EAU4939G
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
5 6 7
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
MPH
on.
Oil pressure warning light "
This warning light comes on if the en-
"
gine oil pressure is low.
"
The electrical circuit of the warning
"
light can be checked by turning the key
to " ". The warning light should come
on and remain on until the engine is
"
started.
If the warning light does not come on
initially when the key is turned to "
EAU11032
"
have a Yamaha dealer check the elec-
trical circuit.
NOTICE
If the warning light comes on when
the engine is running, stop the en-
gine immediately and check oil level.
If the oil level is below the minimum
EAU11061
"
EAU11081
"
EAU62530
"
",
ECA21210