Yamaha R25 Series Owner's Manual page 24

Instrument and control functions
If the last segment on the right flashes,
stop the vehicle, then stop the engine,
and let the engine cool. (See page
7-42.)
NOTICE
Do not continue to operate the en-
gine if it is overheating.
4
TIP
The coolant temperature varies with
changes in the weather and engine
load.
Transmission gear display
2
1
1. Neutral indicator light "
2. Transmission gear display
This display shows the selected gear.
The neutral position is indicated
by " " and by the neutral indicator
light.
ECA10022
Multi-function display
1. Multi-function display
The multi-function display is equipped
with the following:
an odometer
two tripmeters
MPH
a fuel reserve tripmeter
MPG mile
an instantaneous fuel consump-
tion display
an average fuel consumption dis-
"
play
an oil change tripmeter
an oil change indicator
The odometer shows the total distance
traveled by the vehicle.
The tripmeters show the distance trav-
eled since they were last set to zero.
Push the "SELECT" button to switch
the display between the odometer
mode "ODO", tripmeter modes "TRIP
1" and "TRIP 2", instantaneous fuel
consumption mode "MPG","km/L" or
"L/100 km", average fuel consumption
mode "AVE_ _._ MPG","AVE_ _._ km/
MPH
L" or "AVE_ _._ L/100 km" and oil
MPG mile
change tripmeter mode "OIL TRIP" in
the following order:
1
ODO
km/L or L/100 km
AVE_ _._ km/L or AVE_ _._ L/100 km
OIL TRIP
The fuel reserve tripmeter shows the
distance traveled since the fuel level
warning light came on.
If the left segment of the fuel meter
starts flashing, the display automati-
cally changes to the fuel reserve trip-
meter mode "TRIP F" and starts
4-6
TRIP 1 TRIP 2 MPG,
AVE_ _._ MPG,
ODO