Yamaha R25 Series Owner's Manual page 25

counting the distance traveled from that
point. In that case, push the "SE-LECT"
button to switch the display between
the various tripmeter,
instantaneous fuel consumption and
average fuel consumption modes in
the following order:
TRIP F MPG, km/L or L/100 km
AVE_ _._ MPG, AVE_ _._ km/L or AVE_
_._ L/100 km OIL TRIP
TRIP 1 TRIP 2 TRIP F
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second.
If you do not reset the fuel reserve trip-
meter manually, it resets itself auto-
matically and the display returns to the
prior mode after refueling and traveling
5 km (3 mi).
TIP
The odometer will lock at 999999.
The tripmeters will reset and con-
tinue counting after 9999.9 is
reached.
Instantaneous
display
odometer,
ODO
1. Instantaneous fuel consumption display
The instantaneous fuel consumption
display can be set to either "MPG",
"km/L" or "L/100 km".
"MPG": The distance that can be
traveled on 1.0 US gal of fuel un-
der the current riding conditions is
shown.
"L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
"km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
Instrument and control functions
fuel consumption
To switch between the instantaneous
fuel consumption displays, push the
"SELECT" button for one second.
TIP
If traveling at speeds under 20 km/h
(12 mi/h), "_ _._" is displayed.
MPH
Average fuel consumption display
1
1. Average fuel consumption display
The average fuel consumption display
can be set to either "AVE_ _._ MPG",
"AVE_ _._ km/L" or "AVE_ _._ L/100
km".
This display shows the average fuel
consumption since it was last reset.
"AVE_ _._ MPG": The average dis-
tance that can be traveled on 1.0
US gal of fuel is shown.
4-7
4
MPH
1