Yamaha R25 Series Owner's Manual page 23

Clock
MPG mile
1
1. Clock
The clock displays when the key is
turned to " ".
To set the clock
1. Turn the key to " ".
2. Push the "SELECT" button and
"RESET" button together for at
least two seconds.
3. When the hour digits start flash-
ing, push the "RESET" button to
set the hours.
4. Push the "SELECT" button, and
the minute digits will start flashing.
5. Push the "RESET" button to set
the minutes.
6. Push the "SELECT" button and
then release it to start the clock.
Fuel meter
MPH
1. Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank.
When the key is turned to "
play segments of the fuel meter will
sweep once across the fuel level range
and then return to the current amount
in order to test the electrical circuit.
The display segments of the fuel meter
disappear towards "E" (Empty) as the
fuel level decreases. When the last
segment starts flashing, refuel as soon
as possible.
TIP
This fuel meter is equipped with a self-
diagnosis system. If a problem is de-
tected in the electrical circuit, the fol-
Instrument and control functions
lowing cycle is repeated until the
malfunction is corrected: fuel level seg-
ments flash eight times, then go off for
approximately three seconds. If this
occurs, have a Yamaha dealer check
the electrical circuit.
MPH
MPG mile
Coolant temperature meter
1
", the dis-
1. Coolant temperature meter
The coolant temperature meter indi-
cates the temperature of the coolant.
When the key is turned to "
play segments of the digital coolant
temperature gauge will sweep once
across the temperature range and then
return to "C" in order to test the electri-
cal circuit.
4-5
MPH
MPG mile
1
", the dis-
4