Additional Checks For Remote Models - Manitowoc SF0406A Installation, Use & Care Manual

Section 2

Additional Checks for Remote Models

Is the lineset length, rise and drop within
the guidelines?
Has the receiver service valve been
opened?
Has the traditional remote condenser been
located where ambient temperatures will
remain in the range of -20° - 120°F
( -29 - 49°C).
Is the line set routed properly?
Are both refrigeration lines to remote
condenser run so they do not lay in water
and are properly insulated?
Has the ice machine receiver service valve
been opened?
Does the condenser fan motor(s) operate
properly after start-up?
Part Number 000001196 3/08
Installation Instructions
Have all the refrigeration fittings and joints
been leak checked?
Is the line set routed properly?
Has the condenser/condensing unit been
installed to prevent any roofing damage?
Have the refrigeration lines been insulated
and secured properly to prevent vibration?
Has the RFC remote condensing unit been
located where ambient temperatures will
remain in the range of -20° to 130°F (-29° to
54.4°C)?
Are the plastic bushings installed on the RFC®
condensing unit to prevent refrigeration tubing
from contacting the sheet metal panel?
Is a refrigeration oil trap (S-trap, QuietQube
Only) installed if the condenser is installed 21
to 35 feet (6 to 11m) above the ice machine
head?
2-29