New Holland BR6080 Operator's Manual page 134

Wheels and tires [26070934]
Wheel changing
WARNING
Heavy objects!
Lift and handle all heavy components us-
ing lifting equipment with adequate capacity.
Always support units or parts with suitable
slings or hooks. Make sure the work area is
clear of all bystanders.
Failure to comply could result in death or se-
rious injury.
1. Place a jack of sufficient capacity (1) under the ma-
chine only at the points identified by the decals (2).
Refer to Specifications Section for the weight of the
balers.
2. Lift the wheel off the ground and let the weight of the
baler down onto an axle stand where possible.
3. Remove the wheel nuts (1) and wheel.
Reassemble in reverse order the wheel, tighten the nuts,
rejack, remove the stand, lower the baler, remove jack
and retorque the opposite nuts equally around the rim to
380 N·m (280.3 lb ft).
7 - MAINTENANCE
W0398A
7 - 26
1
ZIL10FCRB235AAA
2
ZIL10FCRB188AAA