New Holland BR6080 Operator's Manual page 72

2. Securely install the hydraulic hose quick‐disconnect
couplings (1) into the tractor remote control hy-
draulic outlets so the baler tailgate and pickup will
function properly in both directions.
Raise and lower the tailgate several times with the
tractor hydraulics. This will purge air from the hy-
draulic system and fill the system with oil.
NOTE: As the baler will retain a portion of the hy-
draulic oil from the tractor, check the tractor hy-
draulic system for correct oil level after purging and
add oil if necessary.
3. Check all hose and tubing connections for hydraulic
leaks and tighten where necessary.
4. Make sure the hydraulic lines do not rub the PTO.
and there is enough slack to permit sharp turns.
4 - OPERATING INSTRUCTIONS
4 - 14
2
20021693