See Process Variables; Setup Operations; Basic - Fluke 754 User Manual

See Process Variables

From the Active Device screen:
1. Push the Process softkey to see more device
variables and their continuously updated values.
2. Select View Process Variables.
3. Push .
To see more data, push the Next Page softkey. See
Figure 6.
Figure 6. Device Variables Screen

Setup Operations

The Setup softkey gives access to these five setup
functions:
•

Basic

•
Sensor
•
Device Identification
•
HART Output
•
HART Information
Basic
Use the Basic setup screen to replicate a transmitter as
described at the end of this manual.
From the Active Device screen, push the Setup and
Basic softkeys. See Figure 7.
gnx08s.bmp
Communication Operations
Figure 7. Basic Setup Screen
HART Mode
gnx09s.bmp
9