Introduction; How To Contact Fluke - Fluke 754 User Manual

Introduction

 Warning
To prevent possible electrical shock, fire, or
personal injury, read the Safety Information
in the 753/754 Users Manual before you use
the 754 Documenting Process Calibrator.
Adjustment is necessary for analog transmitters during

calibration. With HART (Highway-Addressable Remote
Transducer) transmitters, adjustments are by remote
command. For these adjustments, use of a
communication tool and a Calibrator is necessary. The
754 (Product or Calibrator) gives communication and
calibration functions in one tool.
This guide tells you how to use the HART communication
mode. HART mode is a procedure for the Product to
communicate over its serial HART interface to a HART
transmitter. See the 753/754 Users Manual for safety
information, analog mode use instructions, specifications,
and more general data. All of the Product functions shown
in the 753/754 Users Manual are available and can be
used with supported HART transmitters. The only
transmitters addressed in this manual are HART
transmitters.
Some specific HART transmitter commands are
only available with supported devices.
Note

How to Contact Fluke

To contact Fluke, call one of the following telephone
numbers:
•
Technical Support USA: 1-800-44-FLUKE
(1-800-443-5853)
•
Calibration/Repair USA: 1-888-99-FLUKE
(1-888-993-5853)
•
Canada: 1-800-36-FLUKE (1-800-363-5853)
•
Europe: +31 402-675-200
•
Japan: +81-3-3434-0181
•
Singapore: +65-738-5655
•
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To view, print, or download the latest manual supplement,
visit http://us.fluke.com/usen/support/manuals.
1