Table of Contents
Advertisement
EU Declaration of Conformity
Manufactured by:
Finish Thompson, Inc.
921 Greengarden Road
Erie, Pennsylvania 16501 U.S.A.
Phone: 1-(814)-455-4478
Fax
1-(814)-455-8518
Email:
fti@finishthompson.com
Web:
www.finishthompson.com
This declaration applies to Finish Thompson AC Series pumps.
Finish Thompson declares under our sole responsibility that the product listed above conforms to the relevant
provisions of EU directive 2014/34/EU of 26 February 2014 for equipment and protective systems intended for use
in potentially explosive atmospheres, and is certified for safe use in Atmosphere Group IIC/IIIC category 2 areas.
This product has used the following harmonized standards to verify conformance:
Non-electrical equipment for potentially explosive atmospheres: EN ISO 80079-36:2016
Basic Methods and Requirements.
Non-electrical equipment intended for use in potentially explosive atmospheres: EN ISO 80079-37:2016
Protection by construction safety "ch." and control of ignition source "bh"
This product must not be used in areas other than specified above. If in doubt consult an authorized
Approved by:
distributor, or refer to the manufacturer Finish Thompson.
1026
II 2GD
Ex h IIC TX Gb
Ex h IIIC TX Db
FTZU 05 A127-05
Date: 5/5/2017
Advertisement
Table of Contents
