Preface; Product Overview - Tektronix TSG4100A Series Installation And Safety Instructions

Preface

Product overview

TSG4100A Series RF Signal Generators Installation and Safety Instructions
This document contains the following information:
Product warranty information (See page 3.)
Product overview (See page 1.)
Product documentation list (See page 2.)
Important safety precautions to avoid injury and prevent damage to this
product or any products connected to it (See page 4.)
EMC (electromagnetic compliance), safety, and environmental standards with
which the instrument complies (See page 8.)
Electrical, power, and environmental requirements to use the product (See
page 12, Operating requirements.)
Rear and front panel connectors description (See page 15.)
Front panel controls description (See page 19.)
Installation procedures (See page 18, Getting started.)
Power on and power off procedures (See page 18.)
The Tektronix TSG4102A, TSG4104A, and TSG4106A RF Signal Generators
feature a frequency synthesis technique that provides low phase noise, agile
modulation, fast settling, and virtually infinite frequency resolution. These
instruments also include a dual baseband arbitrary waveform generator and
built-in support for digital vector modulation.
Each model has two front panel outputs with overlapping frequency ranges. The
front panel BNC output provides sine wave signals from DC to 62.5 MHz with an
adjustable DC offset, and amplitudes ranging from 1 mV
panel Type N connector output provides AC coupled, sine wave signals from 950
kHz to 2 GHz (TSG4102A), 4 GHz (TSG4104A), and 6 GHz (TSG4106A) with
power levels ranging from –110 dBm to +16.5 dBm.
to 1 V . The front
RMS RMS
1